Black Quickserve Tap with Back Nut - For Use with Fermentation Vessel or Pressure Barrel

These black Quickserve taps fit our 25 litre and 33 litre fermentation vessels and our 5 gallon pressure barrels and King Kegs and are supplied with a back nut. They require a 26-27mm hole (26mm is quite tight, 27mm is fine, but please do not make the hole any bigger than this). 180 degrees from full closed to fully open. When fitting, please smear a little petroleum jelly (e.g. Vaseline) around the seal.

Flow rate: 203 ml/s (for water at a constant 25 cm. head height)